Motorola GR300 service manual Reading the Transmitter Radio

Section 6

Programming

Reading the Transmitter Radio

After reading the repeater, you will see the screen in Figure 6-4.

Figure 6-4. Read Transmitter Screen

You have two options: to read the transmitter, or to skip it.

To read the transmit radio:

1.Connect the programming cable to the transmitter.

2.Press F2 to continue.

To skip the transmitter:

1. Press F10 to abort.

If you choose to read the radio, and it has previously been programmed in radio mode, you will see the screen in Figure 6-5.

NOTE

Figure 6-5 is for your information only. It may indicate

that the wrong radio was read.

If custom settings have previously been programmed for the radio, you will see the screen in Figure 6-6.

March, 1993 6880902Z68-O Section 6-4