Section 6
Programming
You have two choices: to read the receiver, or to skip it
To read the receiver:
1.Connect the programming cable to the receiver.
2.Press F2 to continue.
To skip the receiver:
1. Press F10 to abort.
As with the transmitter, if the radio has previously been programmed in radio mode, the warning screens in Figure
Configuring the System
From the Main Menu:
1.Press F4 (Change/View).
2.Press F2 (Radio/Wide). You will see the screen in Figure
Figure 6-8. ZR310 Configuration Screen
Table 6-1 lists the functions you can perform from within the ZR310 Configuration Screen.
March, 1993 |
| Section |