Section 5
Maintenance
Overview
This section contains information and procedures that will enable the technician to proform preventive maintenance and troubleshooting techniques on the ZR310 Community Repeater Panel. Fault isolation and
Preventive Maintenance
Preventive maintenance of the ZR310 consists of:
•Visual inspection
•Periodic cleaning
•Checks using diagnostic commands entered via the DTMF keyboard
Visual Inspection
Check that external surface of the equipment are clean, that connecting cables are not damaged, and that connections are firm. A detailed inspection of the interior electronic circuitry is not needed or desired.
Cleaning
Periodically clean smugges and grime from the exterior housing. Use a soft,
Diagnostic Commands
Refer to Programming section, Diagnostic Commands.
Disassembly
In order to inspect the cable and other components, and to remove the top cover, you must remove the ZR310 from the GR300 housing. Complete the steps in paragraphs 3.1 and 3.2 to accomplish this.
Removal
To remove the ZR310 from the repeater housing, perform the following steps:
1.Place the GR300 power switch to off and unplug the ac line from the ac supply outlet.
2.Using a T15 Torx screwdriver, remove the four M3.5x0.6x6 taptite screws (3) that secure the fan assembly to the repeater housing.
3.Remove the fan assembly (1) and rest it on top of the repeater housing.
March, 1993 | Section |