Motorola Guide to Programming the Repeater for GM300 and GR300 Models

Section 6

Programming

2. Press F6 to change to repeater mode.

You will see the Get/Save Screen, Repeater Mode (Figure 6-2)

Figure 6-2. Get/Save, Repeater Mode

Programming the Repeater

1.From the Get/Save Menu, Press F2 to read the repeater. You will see the screen in Figure 6-3.

You have two options: to read the repeater, or to designate it as a generic. You may need to use the generic designation if the option board is not physically accessible (i.e. programming a replacement radio).

To read the repeater:

1.Connect the programming cable to the repeater.

2.Frees F2 to continue.

To designate the repeater as generic:

1. Press F10 to abort

Figure 6-3. Read Repeater Screen

March, 1993 6880902Z68-O Section 6-2