Icom IC-208H Available tone frequency list, Calling a waiting station using pocket beep

Page 68
DTCSS

10 POCKET BEEP AND TONE SQUELCH

zSet the operating frequency.

TSQLS x Program the CTCSS tone frequency or DTCS code in set mode.

➥Push [SET B(D-OFF)] to enter set mode.

➥ Push [SET B(D-OFF)] or [ENT C(T-OFF)] several times until “CT” for tone squelch or “DT” for DTCS squelch appears.

•“T SQL” blinks when tone squelch (“CT”), or “DTCS” blinks when DTCS squelch (“DT”) is selected.

➥Push [Y]/[Z] to select the desired tone fre- quency or DTCS code.

➥Push [SET B(D-OFF)] to select “DTP” then push [Y]/[Z] to select the DTCS polarity.

➥Push [CLR A(MW)] to exit set mode.

cPush [FUNC] then push [DUP+ 8(TSQLS)]

or [MID 5(DTCSS)] to turn ON the pocket beep with tone squelch or DTCS squelch, re- spectively.

vWhen a signal with the matched tone is re- ceived, the transceiver emits beep tones for 30 sec. and blinks “S.”

bPush [PTT] to answer or push [CLR A(MW)] to stop the beeps and blinking.

•“S” disappears and cancels the pocket beep function automatically.

nTo cancel the tone squelch or DTCS squelch function, push [FUNC] then [ENT C(T-OFF)].

•“T SQL” or “DTCS” disappears

DAvailable tone frequency list

67.0

79.7

94.8

110.9

131.8

156.7

171.3

186.2

203.5

229.1

69.3

82.5

97.4

114.8

136.5

159.8

173.8

189.9

206.5

233.6

71.9

85.4

100.0

118.8

141.3

162.2

177.3

192.8

210.7

241.8

74.4

88.5

103.5

123.0

146.2

165.5

179.9

196.6

218.1

250.3

77.0

91.5

107.2

127.3

151.4

167.9

183.5

199.5

225.7

254.1

 

 

 

 

 

 

 

 

 

 

NOTE: The transceiver has 50 tone frequencies and con-

sequently their spacing is narrow compared to units having

38 tones. Therefore, some tone frequencies may receive

interference from adjacent tone frequencies.

To prevent interference from adjacent tone frequencies,

using the frequencies as in the following table, is recom- mended.

•Recommended tone frequencies

67.0

77.0

88.5

100.0

114.8

131.8

151.4

173.8

203.5

233.6

69.3

79.7

91.5

103.5

118.8

136.5

156.7

179.9

210.7

241.8

71.9

82.5

94.8

107.2

123.0

141.3

162.2

186.2

218.1

250.3

74.4

85.4

97.4

110.9

127.3

146.2

167.9

192.8

225.7

 

 

 

 

 

 

 

 

 

 

 

DCalling a waiting station using pocket beep

A subaudible tone matched with the station’s CTCSS tone fre- quency or 3-digit DTCS code with polarity is necessary. Use the tone squelch on the next page or a subaudible tone en- coder (pgs. 22, 23).

53

Page 67 Page 69
Image 68
Page 67 Page 69
Contents I208H Word Definition Rwarning May occurEquipment damage may occur Personal injury, fire or electric shockPrecaution Operate this device under FCC regulationsSupplied Accessories Dtmf Memory Encoder Quick Reference Guide InstallationInstallation methods Location Using the mounting bracketDrill 4 holes where the mounting bracket is to be installed Microphone connection Separation cable connectionConnect the supplied microphone as illustrated below Detach the controller as belowWhen using the optional MB-65 Optional MB-58 installationDrill 2 or 4 holes where the bracket is to be installed Battery connection DC power supply connectionConnecting to a DC Power Source Connecting to a DC Power SupplyAntenna installation Antenna connectorAntenna uses a PL-259 connector Antenna locationYour first contact IC-208H has 2 m and 70 cm transmittable bandsPush Band to select the desired frequency band You can select the desired frequency band from the HM-133Tune the frequency Setting duplex Repeater operationPush and hold S.MWMW for 1 sec. to program Programming memory channelsPush Func then CLR AMW Panel Description Front panel- controller4CONTROLLER Release Latch 0MEMORY/CALLPRIORITY Switch M/CALLPRIO2BAND Switch Band QTRANSMIT Indicator WDUPLEX Indicators pETONE Indicators Function display2MEMORY Channel Number Indicators 5S/RF Indicators6OUTPUT Power Indicators 7BUSY IndicatorRear Panel Antenna InformationData Jack PIN Assignment Microphone HM-133 0BAND Switch Band1MEMORY/CALL Switch MR/CALL Microphone keypad HoldingCancels frequency entry Cancels the scan or priority watch MingAtion is performed Ing the a to D, # and MkeysOptional Microphones HM-118N/TN/TAN Setting a Frequency DTurning power ON/OFFPreparation Dvfo and memory modesUsing the keypad Using the tuning dialUsing the Y/Z keys Tuning step selection Push Setlock to enter set modeSwitch the microphone keypad lock function Lock functionsFrequency lock DMicrophone keypad lockBasic Operation ReceivingMonitor function SQL Y DMUTE/ SQL Z #16KEY-L, respectivelyPush PWR to exit initial set mode Squelch attenuatorTransmitting Selecting output powerRF Indicator Power Output Push PTT to transmit and push again to re- ceive One-touch PTT functionAudio mute function General Repeater operation flow chartRepeater Operation Release PTT to receive Accessing a repeaterPush and hold PTT to transmit Set the receive frequency repeater output fre Push Simp 9TSQL to return to simplex opera- tionSubaudible tone frequency list Subaudible tonesSubaudible tones Dtmf tones Hz tonePush Y or Z to set the desired offset Offset frequencyPush Band to select the desired frequency SET band Frequency range Duplex direction Setting the auto repeater function ON/OFFFrequency range and offset direction Memory channel selection Memory OperationGeneral description Push S.MWMW for 1 sec. to program Programming a memory channelRotate Dial to select the memory channel to be pro- grammed Programming a memory channel via the microphone Copying memory contents Example Transferring memory channel 30 contents to channel Memory/callmemory/callSelect the memory/call channel to be transferred Rotate Dial to select the target memory channelRotate the tuning dial to select the desired character Programming channel namesPush Then push To select the channel. Push DTo indicate the channel name Push SET BD-OFF or ENT CT-OFF until ANM appearPush S.MWMW momentarily, then push S.MWMW again for 1 sec Memory clearingRotate Dial to select the memory channel to be cleared Rotate Dial to select the contents in the bank Push Y/Z to select the desired contents in the bankMemory bank selection Rotate Dial to select the desired bank, a to JOry channel via Y/Z or keypad Memory bank settingPush MR/CALL then select the desired mem Transferring bank contents Call channel transferring Call Channel OperationCall channel selection Programming a call channel Scan Operation Scan typesPush VFO/LOCK to select VFO mode for Memory mode for memory scanScan start/stop PreparationScan edges programming Example Programming 145.300 MHz into scan edges 1AProgramming scan edges via microphone Select a memory channel Skip channel settingPush Monidtmf to exit set mode Rotate Dial to set the desired timer Scan resume conditionOrity watch starts Priority WatchPriority watch types Push MR/CALL, then push Scan 2 to start the memory scan Priority watch operationPush M/CALLPRIO for 1 sec. to stop the watch Dtmf Memory Encoder Programming a Dtmf codePush Monidtmf for 1 sec. to turn the Dtmf encoder on Push Monidtmf to exit Dtmf memory programming conditionPush Func then LOW 6DTMF to turn Dtmf Dtmf encoder on Push VFO/LOCK to exit the programming conditionTransmitting a Dtmf memory directly Transmitting a Dtmf codeAutomatic transmission Dtmf memory Push DTMF-S again to deactivate the Dtmf direct selection Manual transmissionMentarily, then push the desired Dtmf keys A to F Pocket Beep and Tone Squelch Pocket beep operationWaiting for a call from a specific station Lect the Dtcs polarityCalling a waiting station using pocket beep Available tone frequency listTone/DTCS squelch operation Selects the tone type to be scanned Tone scanPush TONET-SCAN for 1 sec. to start the tone scan Set mode Other FunctionsDisplay dimmer Display colorRepeater tone Tone squelch toneTuning step Dtcs codeOffset frequency Dtcs polarityScan resume timer Memory name settingChannel skip setting Memory bank settingProgram scan skip setting Bank link settingMemory bank link function Turns weather alert function on and OFFInitial set mode Entering initial set modeKey-touch beep Time-out timerDAuto power OFF Squelch delay Cooling fan controlData transmission speed Microphone sensitivityNarrow TX function Active bandDtmf speed AM/FM narrow mode Push Band or MR/CALL to select the desiredTurn the weather alert function OFF in set mode Weather channel operationWeather channel selection Weather alert functionDefault setting Microphone keysUP/DN keys on a microphones 1/F-2 keys on HM-133Partial reset Cloning between transceivers Push Setlock on the master transceiverCloning using a personal computer Cloning errorPacket operation Bps packet operationData speed Connect the transceiver and a TNC as illustrated belowOther Functions Bps high speed packet operation Adjusting the transmit signal output from TNC Increase the TNC output levelProblem Possible Cause Solution MaintenanceTroubleshooting Fuse Fuse replacement20 a Specifications and Options SpecificationsDgeneral DtransmitterOPC-600/600R*, OPC-601/601R* Separation Cables OPC-347/OPC-1132 DC Power CablesOptions Mode Arrangement Mode Arrangement Kamiminami, Hirano-ku, Osaka 547-0003 Japan
Top Page Image Contents