Icom IC-208H Memory/callmemory/call, Select the memory/call channel to be transferred

DMemory/call➪memory/call

qSelect the memory/call channel to be transferred.

➥Push [M/CALL•PRIO] several times to select memory mode or call channel, then rotate [DIAL] or push [BAND]

to select the desired memory or call channel respec- tively.

wPush [S.MW•MW] momentarily.

• “!” indicator and “-- -- --” indication blink, and shows VFO con-

ditions.

eRotate [DIAL] to select the target memory channel.

•“C1” or “C2” blinks when the call channel is selected.

•Scan edge channels, 1A/1B, 2A/2B, 3A/3B, 4A/4B, 5A/5B can also be selected.

rPush [S.MW•MW] for 1 sec. to transfer the selected mem- ory/call channel contents to the target memory.

• The targeted memory and transferred contents are indicated.

MEMORY OPERATION 5

zSelect the memory/call channel to be trans-

MR/CALL ferred.

➥Push [MR/CALL] to select memory mode,

MW	then select the desired memory channel
	via [Y]/[Z] or keypad.
	➥ Push [MR/CALL] for 1 sec. then push
[Y]/[Z]	[BAND] to select the desired call channel.	5
	x Push [FUNC], then [CLR A(MW)] momentarily.
	• “!” indicator and “-- -- --” indication blink, and
BAND	shows VFO conditions.
	c Push [Y]/[Z] to select the target memory

channel.

•“C1” or “C2” blinks when the call channel is selected.

•Scan edge channels can also be selected.

•The keypad cannot be used for the selection. v Push [FUNC] then push [CLR A(MW)] for

1 sec. to transfer the selected memory/call channel contents to the target channel.

•The targeted channel and transferred contents are indicated.

[EXAMPLE]: Transferring memory channel 30 contents to channel 31.

Front panel operation:	. Select the target channel.	Push	for 1 sec.
Select the memory channel, then push

HM-133 operation:			Push	then push	for 1 sec.
Select the memory channel, push	then push	.

30