Icom IC-208H Memory bank selection, Rotate Dial to select the desired bank, a to J

5 MEMORY OPERATION

■Memory bank selection

The IC-208H has a total of 10 banks (A to J). Regular memory channels, 1 to 500, are assigned into the desired bank for easy memory management.

qPush [M/CALL•PRIO] several times to select memory

mode, if desired.

wPush [BAND] to select memory bank condition.

• Bank’s initial blinks

[BAND] Bank initial blinks

eRotate [DIAL] to select the desired bank, A to J.

•Banks that have no programmed contents are skipped. r Push [BAND] to set the bank.

•Bank’s initial stops blinking.

tRotate [DIAL] to select the contents in the bank.

•No channel numbers are displayed for memory bank operation. y To return to regular memory condition, push [BAND] twice.

BANK

[Y]/[Z]

zPush [MR/CALL] to select memory mode, if de- sired.

x Push [FUNC] then [MONI 1(BANK)] to select memory bank condition.

•Bank’s initial blinks

cPush [Y]/[Z] to select the desired bank, A to J.

•Only programmed memory bank can be selected. v Push [CLR A(MW)] to set the bank.

•Bank’s initial stops blinking.

bPush [Y]/[Z] to select the desired contents in the bank.

•No channel numbers are displayed for memory bank operation.

nTo return to regular memory condition, push

[FUNC], [MONI 1(BANK)] then push [CLR A(MW)].

35