Scrambler function, User set mode, Dtmf transmission

3 CONVENTIONAL OPERATION

DDTMF transmission

If the transceiver has [DTMF Autodial] assigned to it, the automatic DTMF transmission function is available. Up to 8 DTMF channels are available.

TO SELECT A TX CODE:

qPush [DTMF Autodial]— a DTMF channel appears.

w Push []/[ ] to select the desired DTMF channel.

e Push [DTMF Autodial] to transmit the DTMF code in the selected DTMF channel.

■Scrambler function

The voice scrambler function provides private communication be- tween stations. The frequency inversion type is equipped to all ver- sions, and some versions have the Rolling or Non-rolling type installed.

qPush [Scrambler] to turn the scrambler function ON.

w “ ” appears.

e Push [Scrambler] again to turn the scrambler function OFF.

CONVENTIONAL OPERATION 3

■User set mode

User set mode is accessed at power ON and allows you to set seldom-changed settings. In this case you can “customize” trans- 3 ceiver operation to suit your preferences and operating style.

Entering the user set mode:

qWhile pushing and holding [] and [ ], rotate [VOL] to enter the user set mode at power ON.

wPush and hold [P0] to enter user set mode. Push [P0] momen- tarily to select the item.

Then push [] and [ ] to set the desired level/condition.

Available set mode functions:

• Backlight	: ON, Auto or OFF
• Beep	: ON or OFF
• SQL Level	: 0 to 255
• AF Min level	: ON or OFF
• Mic Gain	: 1 to 5

•Battery Voltage : ON or OFF

ePush and hold [P0] again to exit set mode.

User set mode is also available using a programmable key. Please refer to p. 11 [User Set Mode] section.