Position data transmission, Printer connection

4 BIIS OPERATION

■Position data transmission

When the optional OPC-966 INTERFACE CABLE and a GPS receiver is connected to the transceiver, the position (longitude and latitude) data can be transmitted automatically.

Ask your dealer or system operator for connection details.

The position data is transmitted when;

•Status 24 message is received

*When the status 24 message, GPS request, is received.

•Fully automatic

When automatic position transmission is enabled, send the po- sition data according to ‘Time Marker’ and ‘Interval Timer’ set- tings.

•PTT is released

When ‘Send with Logoff’ is enabled.

- Set the “Log-In/Off” item as “L-OFF”.

•After sending a status message When ‘Send with Status’ is enabled.

•After sending an SDM

When ‘Send with SDM’ is enabled.

•After sending status 22 (Emergency) When ‘Send with Emergency’ is enabled.

BIIS OPERATION 4

■ Printer connection

When the optional OPC-966 INTERFACE CABLE is connected to the
transceiver, a printer can be connected to print out the received
SDM content and the ID of the station who sent the message.
Ask your dealer or system operator for connection details.	4

■ PC connection

When the optional OPC-966 INTERFACE CABLE is connected to the transceiver, a PC can be connected to provide remote control, data reception, etc.

Ask your dealer or system operator for connection details.

■Digital ANI

The own ID can be transmitted each time the PTT is pushed (log-in) or released (log-off) during individual or group call communications. By receiving the ANI, the communication log can be recorded when using a PC dispatch application.

In addition, when using the ANI with log-in, the PTT side tone func- tion can be used to inform you that the ID is sent and voice com- munication can be performed.