2 PANEL DESCRIPTION
■Front, top and side panels
| w | |
q | e | |
| ||
| r | |
i | Speaker | |
(See the following | ||
| ||
| NOTE.) | |
u | Microphone | |
Function display | ||
| ||
| (p. 6) | |
| t |
y
NOTE: If the speaker netting (for dust proofing) becomes wet, dry it with a hair drier (cool mode) etc. before operating the transceiver. Otherwise the audio may be difficult to hear for loss of the sound pressure.
PANEL DESCRIPTION | 2 |
q VOLUME CONTROL [VOL] | 2 |
Turns power ON and adjusts the audio level.
w RED BUTTON
The desired function can be assigned by your dealer.
e ANTENNA CONNECTOR
Connects the supplied antenna.
r
Connects the optional
[SP MIC] jack cover
NOTE: KEEP the [SP MIC] jack cover attached to the transceiver when the speaker- microphone is not used.
(See p. 2 for details)
t
The desired functions can be assigned independently by your dealer.
yCH UP AND DOWN KEYS [
]/[
]
➥During standby condition, push to select an operating channel.
➥After pushing [TX Code CH Select], push to select a TX code channel.
➥After pushing [DTMF Autodial], push to select a DTMF channel.
➥After pushing and holding [Scan A Start/Stop]/[Scan B Start/Stop], push to select a scan group.
➥After pushing [Digital], push to select a BIIS code, status num-
ber or SDM.
*Desired functions can be assigned independently by your dealer.
☞ Continue to the next page.
3 | 4 |