4 BIIS OPERATION
■Transmitting a status
DGeneral
The status message can be selected with the programmed text, and the message text is also displayed on the function display of the called station.
Up to 24 status types (1 to 24) are available, and the status mes- sages 22 and 24 have designated meanings.
Status 22: Emergency*
Status 24: GPS request
*The status 22 can also be used as a normal status message by dis- abling the designated meaning. However, the status 24 is fixed.
The status call can be sent with both individual and group calls.
DTransmitting a status
qWhile in the standby condition, push [P1] (Digital), then push [
]/[
] to select the desired station/group code.
wPush [P1] (Digital) again, then push [
]/[
] to select the de- sired status message.
Or, you can select the desired status message using [Status Up]/[Status Down] key directly.
Status message is displayed.
ePush [P0] (Call) or [PTT]* to transmit the status message to the selected station/group.
*PTT call can be made only when PTT call capability is permitted.
•2 beeps will sound and the transceiver returns to the standby con- dition automatically when the transmission is successful.
29
BIIS OPERATION 4
■ Transmitting an SDM
D General
The short data message, SDM, can be sent to an individual station
or group stations. Also, 8 SDM memory channels are available and | 4 |
the messages can be edited via PC programming. |
DTransmitting an SDM
qWhile in the standby condition, push [P1] (Digital), then push [
]/[
] to select the desired station/group code.
wPush [P1] (Digital) again, then push [
]/[
] to select the de- sired SDM.
Or, you can select the desired SDM using [Status Up]/[Status Down] key directly.
SDM is displayed.
ePush [P0] (Call) or [PTT]* to transmit the SDM to the selected station/group.
*PTT call can be made only when PTT call capability is permitted.
•2 beeps will sound and the transceiver returns to the standby con- dition automatically when the transmission is successful.
30