4 BIIS OPERATION
DGroup call
qWhen a group call is received;
•Beeps sound.
•“ 
” appears and the mute is released.
•The programmed text message (e.g.“ 
”) and the calling sta- tion ID (or text) is displayed alternately, depending on the setting.
•“ 
” appears or blinks depending on the setting.
Appears | Appears or blinks |
wPush and hold [PTT], then speak into the microphone at a nor- mal voice level.
NOTE: Only one station is permitted to speak.
•Transmit/Busy indicator lights red. e Release [PTT] to return to receive.
•Transmit/Busy indicator lights green while receiving a signal.
rTo finish the conversation, push [P3] (Moni(Audi)) to send the “Clear down” signal.
•Either station can send a clear down signal.
•“ 
” is displayed for 2 sec. (approx.)
•“ 
” disappears and the transceiver returns to the standby condi- tion.
BIIS OPERATION 4
DDisplaying the received call record
— Queue indication
The transceiver memorizes the calling station IDs for record. Up to 3 calls can be memorized, and the oldest call record is erased when a 4th call is received. However, once the transceiver is pow- 4 ered OFF, the all records are cleared.
qPush [P1] (Digital) for 1 sec.
• Displays following indication.
When a record is available
When no record is available
wPush [
]/[
] to select the desired call.
ePush [P1] (Digital) for 1 sec. again to return to the standby con- dition.
•When no operation is performed for 30 sec., the transceiver returns to the standby condition automatically.
21 | 22 |