Shes, Data, Automatic | Quantum HD 9021 instruction

			ENGLISH
Key	Symbols lit besides	Description
	the numbers
		shes.
		During the RCD phase the AUTO-
		POWER-OFF function is disabled,
		that is the instrument does not swit-
		ch off automatically. To switch off,
		press the ON/OFF key. If the stored
		data are not reset they remain in
		the memory until REC is pressed
		again. When the key is pressed for
		the first time it starts storing data in
		the memory, the second time it sto-
		ps data storage (the data stored so
		far are not erased), the third time it
		restarts storage and updates the
		data.
	MAX	When the key is pressed during
	MAX	When the key is pressed during
	MIN	RECORD phase or at the end of Q
		RECORD, before the DATA RESET
		key is pressed, the display shows in
		sequence the maximum value recor-
		ded by the probe, the minimum
		value, the Q Energy value and finally
		the current value. If the DATA
		RESET key has been pressed, the
		"Err" message appears on the
		display, referring to the maximum,
		minimum and Q Energy values.
	AUTO	When the AUTO key is pressed the
	AUTO	When the AUTO key is pressed the
		instrument chooses what scale to
		operate on. Change of scale is
		automatic.

– 28 –

shes.