Mustang Survival MSV971 manual Step j. Folding and Packing Instructions

Page 18

Mustang Survival MSV971 Life Preserver and Survival Vest

Description and Maintenance Instructions

9 June 2004, Rev: 1.0

j.Ensure (right side only) that the lanyard of the beaded handle passes through the reinforced opening of the container.

NOTE: The inflator should be on top of the folded cell before closing to ensure proper activation of the cylinder when the lanyard is pulled.

Figure 12. Step j. Folding and Packing Instructions

k.Repeat steps f. to i. for the left side of the inflatable cell.

l.Fold the cell into the top portion of the container, and continue to ease the slider along up to the top centre where the zipper ends while keeping the cell in the container. Don’t remove the slider yet.

Figure 13. Step l. Folding and Packing Instructions

15

This document is for information purposes only. It is not a controlled

 

document and may not be considered current when printed.

Image 18
Contents June 9, 2004, REV Table of Contents Table of Figures Vest SizesIntroduction Testing 5 FitGeneral FeaturesDesign and Construction Assembled LP/SVLife Preserver Inflatable CellDocument and may not be considered current when printed Manual CO2 Inflation Device Beaded CO2 Inflation HandleOral Inflator Protective ContainerSurvival Vest GrommetAdjustable Waist Belt Side Adjustment StrapsRescue Harness System Ballistic Liner Attachment Points OperationComponent Locations Inflated Cell Donning and Packing Instructions General Folding and Packing InstructionsPosition Zipper ClosingSliders Step f. Folding and Packing Instructions Harness Loop Step j. Folding and Packing Instructions Step o. Folding and Packing Instructions Treatment After Immersion Maintenance and CareCleaning Fresh Water ImmersionWork Area Service LifeMaintenance Reporting StoragePRE-FLIGHT and POST-FLIGHT Inspection Inspection and TestingRequirements Visual InspectionMaintenance Inspection Visual Inspection of the Inflatable CellInflation Manifold Valve Test Oral Inflator Valve TestInflatable Cell Test CO2 Cylinder Inspection and Weight Test CO2 Inflation Device TestSurvival Vest or Protective Container RepairsIdentification of Defects SewingDamage Treatment Repair MaterialsProtective Container Fabric Patching Step b. Patching Steps f. and g. Patching 12 mm 1/2 Oral Inflator Valve CO2 Inflation DeviceStep a. Replace Inflatable Cell Self-locking Tie Step g. Replace Inflatable Cell Self-locking Tie CO2 CylinderParts List SummaryMSV971 Survival Vest and Index Numbers Parts List for the MSV971 Survival Vest MM Solas Reflective Tape MSV971 Inflatable Cell and Index Numbers MSV971 Protective Cover and Index Numbers