Mustang Survival MSV971 manual Step o. Folding and Packing Instructions

Page 19

Mustang Survival MSV971 Life Preserver and Survival Vest

Description and Maintenance Instructions

9 June 2004, Rev: 1.0

m.Secure the beaded inflation handle to the Velcro™ located on the underside of the protective container, at the lower right.

n.Carefully remove the sliders from the zipper ends, and pinch together the Velcro™ tabs. Re-stow the sliders in the vest pockets.

o.Secure the beaded inflation handle to the Velcro™ located on the underside of the protective container.

Figure 14. Step o. Folding and Packing Instructions

p.Flatten the top portion of the life preserver and mate the Velcro™ tab to the patch on the back of the Survival Vest.

Figure 15. Step o. Folding and Packing Instructions

16	This document is for information purposes only. It is not a controlled
	document and may not be considered current when printed.

Image 19

Contents June 9, 2004, REV Table of Contents Vest Sizes Table of FiguresIntroduction 5 Fit TestingAssembled LP/SV FeaturesDesign and Construction GeneralInflatable Cell Life PreserverDocument and may not be considered current when printed Beaded CO2 Inflation Handle Manual CO2 Inflation DeviceProtective Container Oral InflatorGrommet Survival VestSide Adjustment Straps Adjustable Waist BeltRescue Harness System Operation Ballistic Liner Attachment PointsComponent Locations Inflated Cell General Folding and Packing Instructions Donning and Packing Instructions Zipper Closing Position Sliders Step f. Folding and Packing Instructions Harness Loop Step j. Folding and Packing Instructions Step o. Folding and Packing Instructions Fresh Water Immersion Maintenance and CareCleaning Treatment After ImmersionStorage Service LifeMaintenance Reporting Work AreaVisual Inspection Inspection and TestingRequirements PRE-FLIGHT and POST-FLIGHT InspectionVisual Inspection of the Inflatable Cell Maintenance InspectionOral Inflator Valve Test Inflation Manifold Valve TestInflatable Cell Test CO2 Inflation Device Test CO2 Cylinder Inspection and Weight TestSewing RepairsIdentification of Defects Survival Vest or Protective ContainerRepair Materials Damage TreatmentProtective Container Fabric Patching Step b. Patching Steps f. and g. Patching 12 mm 1/2 CO2 Inflation Device Oral Inflator ValveStep a. Replace Inflatable Cell Self-locking Tie CO2 Cylinder Step g. Replace Inflatable Cell Self-locking TieSummary Parts ListMSV971 Survival Vest and Index Numbers Parts List for the MSV971 Survival Vest MM Solas Reflective Tape MSV971 Inflatable Cell and Index Numbers MSV971 Protective Cover and Index Numbers