Mustang Survival MD3091, MD3196 manual Closing Zipper 1 Long Zipper, Closing Zipper 2 Short Zipper

Page 12
H

Closing Zipper 1 – Long Zipper

NOTE: Mustang Survival uses advanced SecureZip™ 2-step zippers.

1.Reset zipper 1 by pulling zipper pullH around the top of the LP to Velcro™ tabI (Figure 23).

I

I

2. Close zipper 1

by pulling zipper

H

FIGURE 23

FIGURE 24

pullH back to the

 

 

 

beginning of the

 

 

 

zipper tape end, and fasten Velcro™ tabsI to keep the zipper closed (Figure 24).

CAUTION: Ensure the inflation cell does not get caught in the zipper.

Closing Zipper 2 – Short Zipper

1.Reset zipper 2

by pulling zipper

FIGURE 25

pullJ to Velcro™

 

tabI (Figure 25).

 

2.Close zipper 2 by pulling zipper

pullJ back to the

 

beginning of the

J

zipper tape end

 

(Figure 26).

 

I

FIGURE 26

I

J

CAUTION: Ensure the inflation cell does not get caught in the zipper.

3.Push the zipper tape ends into the openings at the bottom of the packed LP, and fasten the beaded manual inflation handle to the LP.

Stowing the Manual Conversion Cap (MD3196 Only)

An interior pocket is provided for stowing a

FIGURE 27

manual conversion cap (MA7219) (Figure 27).

 

If used, the cap should be attached by lanyard

 

through the eyelet located within the front

 

slash entry (see AUTO/MANUAL CONVERSION).

 

When repacking, tuck the cap into the pocket

 

(Figure 27) located below the inflator and inside

 

the front slash entry. Close the front slash entry

 

with the hook and loop tape over the inflator.

 

9

Compact Tactical LP Owners Manual

Image 12
Contents MD3196 & MD3091 Do not Remove Prior to Sale Contents Introduction Product Familiarization and Readiness MD3196Readiness Checklist MD3196 & MD3091 MD3091Prior to Use Wearing InflatingManual Inflation Auto-Inflation MD3196Deflating Oral InflationRE-ARMING the MD3196 RE-ARMING the MD3091 Repacking FoldingClosing Zipper 1 Long Zipper Closing Zipper 2 Short ZipperStowing the Manual Conversion Cap MD3196 Only Integrating Pouch Attachment Ladder System and Molle Vest Quick-Release Features Attaching the MA3090 HarnessAUTO/MANUAL Conversion Care and Maintenance Reversing the ConversionTesting for Leaks Testing the Oral Inflation ValveGeneral Tests and Inspections Testing the Manual Inflator Testing the Automatic InflatorCleaning and Storage AccessoriesHT1144 Rev Feb2012