Mustang Survival MD3091 manual Wearing, Inflating, Manual Inflation, Auto-Inflation MD3196

Page 7

WEARING

NOTE: The LP provides 35 lbs of flotation, and is designed for users weighing more than 80 lbs and with a chest size of 30-52 inches.

The LP must be properly adjusted to fit the individual wearing it. Incorrect fit, or improper fastening of attachments can impede LP effectiveness.

To avoid injury to the user or damage to the LP, the LP should never be worn under clothing or anything else that could restrict inflation.

Belts and straps should be adjusted for secure, comfortable fit. When the LP is integrated with MOLLE webbing system and body armor vest, ensure all connections are securely fastened – see Integrating PALS with a MOLLE Vest.

When the LP is used in conjunction with the MA3090 harness assembly, the waist belt should fit securely – see Attaching the MA3090 Harness.

INFLATING

WARNING: The MD3091 LP must be manually activated by the user; it does not automatically inflate upon submersion.

NOTE: When using the MD3196 LP in temperatures below freezing, fully discharging the CO2 cylinder may not provide adequate inflation; use the oral inflator to top-up the LP.

Manual Inflation

Manually activate the inflation mechanism for either LP by jerking firmly downward on the beaded manual inflation handle. The LP should fully inflate within five seconds.

Auto-Inflation – MD3196

CAUTION: If the MD3196 LP has been manually inflated, CO2 inflation could over-pressurize and damage it.

When the inflator is submerged more than approximately four inches in water the hydrostatic water inlet valve opens letting water contact the water-sensitive element. The element releases a stainless steel coil spring, driving a needle into the end of the gas cylinder, puncturing it and allowing the gas to fill the LP. The LP should fully inflate within five seconds.

Special Considerations

Auto-inflation of the MD3196 LP could create a risk of damage under the following circumstances:

Double inflation – CO2 cylinder inflation after full oral inflation.

Inflation while stored in a tight space.

Inflation while in an awkward place or position.

4

 

Compact Tactical LP Owners Manual

Image 7
Contents MD3196 & MD3091 Do not Remove Prior to Sale Contents Introduction MD3196 Product Familiarization and ReadinessMD3091 Readiness Checklist MD3196 & MD3091Prior to Use Auto-Inflation MD3196 WearingInflating Manual InflationOral Inflation DeflatingRE-ARMING the MD3196 RE-ARMING the MD3091 Folding RepackingClosing Zipper 2 Short Zipper Closing Zipper 1 Long ZipperStowing the Manual Conversion Cap MD3196 Only Integrating Pouch Attachment Ladder System and Molle Vest Attaching the MA3090 Harness Quick-Release FeaturesAUTO/MANUAL Conversion Reversing the Conversion Care and MaintenanceTesting the Oral Inflation Valve Testing for LeaksGeneral Tests and Inspections Testing the Automatic Inflator Testing the Manual InflatorAccessories Cleaning and StorageHT1144 Rev Feb2012