Mustang Survival MD3196, MD3091 manual AUTO/MANUAL Conversion

2.Insert the short side of the webbing attachment on the back of the MD3196 LP through Looploc D on the back strap of the chest belt accessory. Securely fasten the snap.

3.Locate the T-tab junction buckle at the top of the crotch strap and thread through the lower back chest belt loop D. Secure the T-tab with the snap, and turn the snapped portion so it is positioned inside the chest belt loop away from the body (Figure 34).

4.Attach male buckle C to the corresponding female buckle on the left side of the chest belt (Figure 35).

5.Repeat step 4 on the right side of the chest belt (Figure 36).

A

D

B C

E

FIGURE 34

6.Unfasten the crotch strap buckle E, and put the LP on as shown (Figure 37).

7.Buckle the chest buckle connecting the left- and right-hand lobes of the LP (Figure 38).

8.Buckle the waist belt (Figure 38).

9.Bring the crotch strap buckle to the front between the legs and securely buckle it to the chest strap (Figure 38).

FIGURE 35

FIGURE 37

FIGURE 36

FIGURE 38

A

B

C

AUTO/MANUAL CONVERSION

Under special circumstances, such as wading or at other times when complete manual control of inflation of the LP is required, the MD3196 LP can be converted from manual/automatic inflation to manual-only inflation.

The LP may be changed back to manual/automatic inflation by removing the conversion cap.

NOTE: This procedure requires an armed MD3196 LP and an MA7219 conversion cap.

12
	Compact Tactical LP Owners Manual