Mustang Survival MD3085 manual MD3087 Automatic Inflator, Removed prior to re-arming

Page 13

removed prior to re-arming.

FIGURE 9	MD3087 Automatic Inflator
	MD3087 Automatic Inflator
		Cap
	CO2	Step 3
	Cylinder
Cylinder /	Step 2
Cylinder /
Bayonet	Sensor Ring
Assembly	Step 9	Yellow Bobbin
		(white side up)
	Bayonet	Step 4
	Tab	HOUSING**
	Step 10	HOUSING**
	Step 10	Step 4
	O-ring	Step 4
	O-ring
	Step 9	Housing
	Pins	Shoulder
	Pins	Step 8
		Step 8
		Service
		Indicator
	Lever	Step 11
	Lever
	Step 10
	Pull-Tab

5)Check the housing to be sure it is clear and dry. If necessary, rinse the inflator with fresh water to remove dirt and salt. Let dry before going to step 6.

11	Inflatable PFD Owner’s Manual

Image 13

Contents MD3085 Inflatable PFD Contents Approval Conditions and Carriage Requirements Instructions for USE What is AN Inflatable PFD?Component Inspection Instructions Uninspected Commercial Vessel UseDonning Instructions Readiness ChecklistSizing and Fit Manual Inflation Inflating Your Inflatable PFDInformation Automatic Backup Inflation MD3087Oral Inflation Deflating the Inflatable PFD Special Considerations for Automatic Devices MD3087 Re-arming Your PFD MD3085 Usage Below Freezing Important Follow instructions in the exact sequence below MD3085 Manual Inflator Re-arming Your PFD MD3087 Removed prior to re-arming MD3087 Automatic InflatorTop Repacking Care and Maintenance Instructions Is Your PFD in Good and Serviceable CONDITION?Every Two 2 Months Before Each UseCleaning and Storing of Your Inflatable PFD MD3085 HOW and WHY to Test Your PFD Cleaning and Storing of Your Inflatable PFD MD3087Put on the Inflatable PFD Model MD3087HOW do YOU Test Your PFD Using the Manual INFLATOR? HOW do YOU Test Your PFD Using the Oral INFLATOR?Hypothermia Wear Your PFDOver How hypothermia affects most adultsInflatable PFD Safety Accessories Do not Attach PFD’S to Your Boat Additional InformationWE Save Lives for a Living