NOTE: The service indicator must be green before proceeding.
12)Refold the Inflatable PFD in accordance with the Repacking section (p. 13).
YOUR INFLATABLE PFD (MD3087) IS NOW READY FOR MANUAL USE WITH AUTOMATIC BACKUP
FIGURE 11
MD3087 Automatic Inflator
Tab | Cylinder |
| |
Piercing |
|
Pin |
|
Service |
|
Indicator | 1/8 Turn |
Groove
Repacking
Gently squeeze the Inflatable PFD until all air or gas has been expelled (Fig. 5). Do not wring or twist the Inflatable PFD. Put the inflation tube dust cap back in its stowed position on the oral inflation tube (Fig. 6).
NOTE: Before following the repacking sequence, be sure to properly
1)Fold side (A) inward along the full length of the dotted line (Fig. 13).
2)Fold lapel (B) inward along dotted lines. Fasten along the full length of the Velcro™. Ensure that the Inflatable PFD is tucked under the Velcro™ strip.
3)Repeat steps 1 and 2 with side (C) and lapel (D). Your Inflatable PFD will look as illustrated in Fig. 14.
4)Fold down the collar (E) along the dotted line (Fig. 14).
5)Fold the cover (F) up over the collar and fasten with (3) Velcro™ tabs (Fig. 14 inset).
6)Ensure the
13 | Inflatable PFD Owner’s Manual |