FIGURE 7 | MD3085 Manual Inflator |
|
Cylinder
Step 2
Sensor Ring
Step 3
Bayonet
Tab
Step 4
Step 3
Lever
ServiceStep 4
Indicator
Step 5
4)Raise, and hold, the lever into the inflator housing. Install a new cylinder/bayonet assembly by engaging bayonet tabs in housing, pushing in then turning clockwise 1/8 turn to a full stop (Fig. 8).
WARNING: PFD WILL ONLY INFLATE IF CYLINDER IS TURNED TO A FULL STOP.
9 | Inflatable PFD Owner’s Manual |