S1000 Autopilot Installation Guide | 9 |
Installation procedures
1. Connecting the autopilot pump
O
Connecting the autopilot pump, sheet 1
WARNING:
Do not allow hydraulic fluid to come into contact with your skin. Wear the protective nitrile gloves provided when working with hydraulic fluid.
WARNING:
A sudden release of pressure from a hydraulic system could result in personal injury. Before disconnecting any part of a hydraulic steering system, safely release any pressure in accordance with the manufacturer’s instructions.
WARNING:
The autopilot pump is not suitable for use in the vicinity of engines, fuel tanks or in any other area where fuel vapor is likely to be present.
CAUTION:
Do not use the transparent hose for connecting any part of the steering system other than between the autopilot pump reservoir and the lower connector on the helm pump.
1. Secure the required hydraulic joints (elbow or straight) into the autopilot pump, as described under Installing
tapered thread fittings.
2. Connect the hydraulic hoses to the autopilot pump. Ensure the transparent hose is connected to the reservoir connector.
StarboardReservoir
connectorconnector
Re | |
Blee | ser |
v | |
d S | oir |
| cr |
| ew |
P tor
| c |
|
w | er | ov |
ri |
troP
Port
connector