Raymarine manual Welcome to the Raymarine S1000 Autopilot, S1000 Autopilot System

Page 2

Welcome to the Raymarine S1000 Autopilot

Congratulations on having bought a Raymarine S1000 Autopilot. This state-of-the-art product is specifically designed to be easily integrated with your boat’s steering system, and enable you to automatically control the steering.

S1000 Autopilot System

S100 Remote

MODE

STANDBY PILOT

Course computer

GPS input

The S1000 requires GPS data (SeaTalk or NMEA compatible), to operate correctly

Existing hydraulic steering system

	Pump control	Autopilot
	Pump control	pump
		pump
	Alarm signal	Safety
		alarm

D7501-1

The S1000 Autopilot is intended for use in:

•HC5345, HC5347, HC5348, and HC5358 SeaStar steering systems.

•Systems with HC4600, HC4645, HC4647, HC4648, and HC4658, BayStar steering rams.

•Systems with Hynautic K6 steering rams.

SeaTalk® is a Registered Trademark of Raymarine

SeaStar® is a Registered Trademark of Teleflex Incorporated

BayStar is a Trademark of Teleflex Incorporated

NMEA® is a Registered Trademark of the National Marine Electronics Assocociation

All other trademarks used in this document are acknowledged.

© Copyright Raymarine UK Limited 2006

Image 2

Contents Installation Guide Welcome to the Raymarine S1000 Autopilot S1000 Autopilot SystemInstallation overview This guide Important noteWhat you need Parts suppliedTools & materials required Planning Locating the course computerLocating autopilot pump Autopilot pump to be lower than helm pumpUsing the hydraulic hoses Installing tapered thread fittings Sealing hydraulic jointsConnecting the autopilot pump Connecting the autopilot pump, sheet10S1000 Autopilot Installation Guide Now bleed the steering system Bleed procedure, sheet Bleeding the steering systemD7339-2 D7337-2 Now secure the pump Securing the pump Securing the pumpFitting the course computer Securing course computerFitting batteries in S100 Remote Safety alarmFitting miscellaneous items Fitting S100 Remote cradle At fixed positionIn-line power switch SecuringElectrical connections SummaryS1000 Autopilot Grounding Diagram a Connecting RF ground preferred method Alternative methodDiagram B Connecting power & autopilot pump Diagram C Connecting the Data Cable GPS requirementDiagram D Nmea connections Using with Raymarine GPSSecure wires Post installation Check for leaks sheetAutopilot checks & setup Checking direction of turn sheetD7705-2 Specifications General Information Suppression Ferrites Raymarine Inc