Raymarine S1000 manual D7337-2

14 S1000 Autopilot Installation Guide

Bleed procedure, sheet 3

5. Using a suitable screwdriver, turn the autopilot pump shaft so that the flat on the shaft is toward the starboard (STBD) side of the pump.

6. SLOWLY turn the wheel clockwise and observe the bubbles in the transparent tube. Keep the helm pump reservoir topped up while doing this. Keep turning the wheel counter-clockwise until there are no more bubbles i.e. so the hydraulic fluid in the transparent tube is clear.

wer

rtoP

r

i

wer

troP

r

i

D7337-2