10S1000 Autopilot Installation Guide
0
Connecting the autopilot pump, sheet 2
3. Set steering to dead ahead | 4. Remove & retain the helm pump |
and do not move it until | breather cap. |
instructed. |
|
5. Remove & retain the plug from the helm pump lower connector, and drain the fluid into one of the cups provided. Discard the drained fluid in accordance with local regulations.
6. Label the port ram hose to aid future reassembly, then disconnect both ram hoses & straight connectors from the helm pump.
7. Using the Installing tapered thread fittings procedure, fit 'T' connectors to the helm pump port and starboard connectors, and a straight connector to the helm pump lower connector.