Furuno FAR-2167DS-BB, FAR-2167DS-D installation manual How to hoist the antenna unit

How to hoist the antenna unit

1.Fix the antenna radiator to the antenna unit chassis as shown on page 1-3.

2.Attach the lifting fixtures and collars as shown below.

3.Position the radiator as shown below and arrange the ropes A and B.

Lifting fixture		Supplied as accessories.
Collar		Remove after installation.
Spring washer
	Spring washer

Hex bolt (M12x20)

Flat washer (M12) (Torque: 63.5 Nm)

Lifting hook (2 pcs.)

Remove lifting fixture, coat threads of hex bolts with silicone grease, and then insert bolts in antenna chassis.

	*	B 1.8m
A 2m

*

* 2. Place protective material (cardboard, foam, etc.) between rope and radiator at the asterisk-marked locations, to prevent damage to radiator.

Attachment of lifting fixtures, collar and ropes

1-4