06Audio Adjustments
Adjusting subwoofer settings
When the subwoofer output is on, you can adjust the
1Press AUDIO to select the
• If the subwoofer setting has been previously adjusted, the frequency of that previously selected will be displayed, such as 50 (Hz) or 125 (Hz).
2Press 2 or 3 to select
125(Hz) is displayed. Only frequencies lower than those in the selected range are output from the subwoofer.
3Press 5 or ∞ to adjust the output level of the subwoofer.
Each press of 5 or ∞ increases or decreases the level of the subwoofer (e.g., +6 to
Section
06
Adjusting source levels
SLA (Source level adjustment) lets you adjust | English |
| |
the volume level of each source to prevent radi- |
|
cal changes in volume when switching between |
|
sources. |
|
•Settings are based on the volume level of the FM tuner, which remains unchanged.
1 | Compare the FM tuner volume level with | Español |
| ||
the level of the source you wish to adjust (e.g., |
| |
|
| |
2 | Press AUDIO to select SLA. |
|
Press AUDIO until SLA appears in the display.
3 Press 5 or ∞ to adjust the source volume. | Deutsch |
| |
Each press of 5 or ∞ increases or decreases |
|
the source volume. |
|
• SLA +4 – SLA |
|
volume is increased or decreased. |
|
Notes | Français |
to the FM tuner. | |
• Since the FM tuner volume is the control, it is |
|
not possible to apply source level adjustments |
|
• The AM tuner volume level can also be |
|
adjusted with source level adjustments. |
|
• The |
|
both set to the same source level adjustment | Italiano |
the same volume adjustment setting automat- | |
volume automatically. |
|
• External unit 1 and External unit 2 are set to |
|
ically. |
|
| Nederlands |
En 29