Graco 313888E important safety instructions Spray With Airless Tip

Page 14

Setup

5.Turn on/off switch OFF and turn drain valve knob to

SPRAY.

ti10796b

6.Turn on/off switch ON, and run pump until a steady stream of material flows from material hose. Turn on/off switch to OFF and turn drain valve knob to

DRAIN.

ti13649a

7. Connect applicator to material hose.

ti21038a

Spray With Airless Tip

1. Install filter and tip extension.

ti13648a

2.Insert metal seat and OneSeal. Insert Switch Tip. Screw assembly onto applicator.

ti13650a

3.Turn drain valve to SPRAY, and turn on/off switch to ON. Turn pump control knob clockwise and/or adjust engine speed until desired material delivery rate is achieved.

ti8794a

4.Spray test pattern. Aim applicator at floor. Turn applicator switch ON and move applicator to spray surface.

ti21042a

ti13651a

14

313888E

Image 14

Contents HTX Contents Fire and Explosion Hazard Recoil Hazard Product Overview HTX 2030 with Base Coat PumpWhen Top Coat Pump is Installed Top Coat Pump Kit 24B140Component Identification Sprayer Top Coat KitComponent Identification Base Coat Applicator Component Identification HTX2030 Air Spray Trigger Gun Grounding Spray Gun Top Coat Pump Start Engine Setup Ti4118aSpray With Airless Tip SpraySpray Without Air Clear Clog Air Assisted Spray Base Coat ApplicatorAir Assisted Spray Air Spray Trigger Gun Do not USE Materials That Cure RapidlySeat Cleanup Add additional water and repeat steps 12 13 if nec- essary Ti11810a Ti11811a Ti13642a Ti21035a Digital Tracking System DTS Main MenuSecondary Menu Stored Data Mode Digital Display Messages Display Sprayer Operation Indication ActionMaintenance DailyTechnical Data Dimensions313888E 313888E Graco Standard Warranty Graco Information