Graco 313888E important safety instructions Ti11810a Ti11811a Ti13642a Ti21035a

Page 20

Cleanup

18.Remove and thoroughly clean applicator, spray tip nozzle and guard with brush.

19.Turn on/off switch OFF when valve is thoroughly flushed.

20.Clean hardened material from applicator nozzles with air nozzle cleaner.

NOTICE

Do not use air nozzle cleaner to clean applicator check valve or airless spray tip nozzle. Damage will occur.

Remove air check valve from applicator to clean hardened material from interior of applicator.

ti11810a

ti11811a

ti13642a

ti21035a

20

313888E

Image 20
Contents HTX Contents Fire and Explosion Hazard Recoil Hazard Product Overview HTX 2030 with Base Coat PumpWhen Top Coat Pump is Installed Top Coat Pump Kit 24B140Component Identification Sprayer Top Coat KitComponent Identification Base Coat Applicator Component Identification HTX2030 Air Spray Trigger Gun Grounding Spray Gun Top Coat Pump Start Engine Setup Ti4118aSpray With Airless Tip SpraySpray Without Air Clear Clog Air Assisted Spray Base Coat ApplicatorAir Assisted Spray Air Spray Trigger Gun Do not USE Materials That Cure RapidlySeat Cleanup Add additional water and repeat steps 12 13 if nec- essary Ti11810a Ti11811a Ti13642a Ti21035a Digital Tracking System DTS Main MenuSecondary Menu Stored Data Mode Digital Display Messages Display Sprayer Operation Indication ActionMaintenance DailyTechnical Data Dimensions313888E 313888E Graco Standard Warranty Graco Information