Graco 313888E Add additional water and repeat steps 12 13 if nec- essary

Page 19

9.Run pump until cleaning ball exits material hose. Save cleaning ball (Base Coat Only).

Cleanup

14.Add additional water and repeat steps 12 - 13 if nec- essary.

ti4551c

10.Turn on/off switch OFF and turn prime/drain valve to DRAIN. Clean outside of pump and suction tube with brush and water.

ti13839a

15.Open prime/drain valve and turn prime switch ON to flush valve.

ti10796b

ti14632a

11.Connect applicator to material hose. Close prime/drain valve.

ti21038a

12.Turn on/off switch ON.

Base Coat Pump: Turn prime switch ON, or appli- cator switch on material hose.

ti14632a

16.Turn on/off switch OFF when valve is thoroughly flushed.

ti10796b

17.Open over pressure relief valve and turn prime switch ON to flush valve.

ti10795b

13. Run pump until clean water flows from applicator.

ti13633a

ti13641ati21039a

313888E

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents HTX Contents Fire and Explosion Hazard Recoil Hazard HTX 2030 with Base Coat Pump Product OverviewTop Coat Pump Kit 24B140 When Top Coat Pump is InstalledTop Coat Kit Component Identification SprayerComponent Identification Base Coat Applicator Component Identification HTX2030 Air Spray Trigger Gun Grounding Spray Gun Top Coat Pump Start Engine Ti4118a SetupSpray Spray With Airless TipAir Assisted Spray Base Coat Applicator Spray Without Air Clear ClogDo not USE Materials That Cure Rapidly Air Assisted Spray Air Spray Trigger GunSeat Cleanup Add additional water and repeat steps 12 13 if nec- essary Ti11810a Ti11811a Ti13642a Ti21035a Main Menu Digital Tracking System DTSSecondary Menu Stored Data Mode Display Sprayer Operation Indication Action Digital Display MessagesDaily MaintenanceDimensions Technical Data313888E 313888E Graco Information Graco Standard Warranty
Top Page Image Contents