Lowrance electronic X52, X59DF manual Sonar Menu Commands

Page 38

Set Keel Offset command: calibrates the unit to show depth under the keel or actual depth from the surface.

Calibrate Water Speed command: adjusts how a speed sensor measures water speed.

Reset Water Distance command: resets water distance log to zero.

Sonar Simulator command: turns the simulator feature on and off. Useful for learning how to operate the unit and all its functions.

Reset Options command: returns all options and auto functions to their original factory settings. It's a great safety net while you're learning and experimenting with various settings.

Set Language command: your unit has menus in 10 different languages. This command switches from one language to another.

Software Information command: tells you which version of the operating software is loaded in your unit.

Sonar Menu

The Sonar Menu contains commands for the major sonar features and options. You access the Sonar Menu by pressing the MENU key one time. You run a command by using the or to highlight the command and then pressing ENT. To clear the menu screen and return to the Page display, press EXIT.

Sonar Page Menu. Most of these functions are discussed in the

Advanced Section.

Sonar Menu Commands

The Sonar Menu contains commands for the major sonar features and options. Most of them are only described in detail in the Advanced

34

Image 38
Contents X52 and X59DF Lowrance Electronics Inc 12000 E. Skelly Dr Tulsa, OK USA Table of Contents Fish I.D. Fish Symbols & Depths Capabilities and Specifications X52 and X59DF IntroductionFeet 244 meters at 200 kHz 1500 feet Transducer Installation PreparationsSingle-frequency trolling motor installations Single-frequency transom installationsDual-frequency transom installations Shoot-through hull installationsPad Deadrise less than Strakes Good location Poor location Location Poor angleTransom Transducer centerline Hull bottom Dot Ratchet Ratchets Lock washer Bolt Nut Flat washer Metal Nut washer Rubber Washers Metal washer BoltTransom Bottom Hull Flat-bottom hull Deep-vee hull Bolt Nut Trolling Motor Bracket InstallationInternal tooth washer Partial fish arches Transducer aimedShoot-Thru-Hull Preparation True bottom Second bottom Manual range setting Transducer location High speed Trolling speedShoot-Thru-Hull Installation Epoxy transducer to hull Speed/Temperature Sensors Transom Bottom of hull Power ConnectionsGood location Powering a Nmea 2000 Buss Nmea 2000 Power cable Page Power connections for the units in this series To Nmea To sonar Network port Units Network Socket Nmea 2000 Cable ConnectionsNmea 0183 Cable Connections Mounting the Unit Bracket, In-Dash or Portable Front 136 61.3 132 23.8 147.4 Millimeter Inch Inches 112 Cut on line 121Hole Diameter Other Accessories Page Basic Sonar Operation Memory MenusMain Menu Commands Sonar Menu Commands Pages Page Page Basic Sonar Quick Reference Sonar Operations Bait School Thermocline With fish Fish ArchesTo adjust sensitivity To Restore Factory Settings Important TipOther Free Training Aids Advanced Sonar Options & Other Features ASP Advanced Signal ProcessingAlarms To adjust and turn on the shallow alarmTo adjust and turn on the deep alarm To turn the fish alarm onCalibrate Speed Chart SpeedBacklight Level Grayline Contrast Thin or no Grayline Wider GraylineDepth Cursor Cursor line Depth boxDepth Range Manual To switch to Manual Depth RangeDepth Range Automatic To turn Auto Depth Range on againDepth Range Upper and Lower Limits Area zoomedFish I.D. Fish Symbols & Depths FasTrackPress ↓ to Fish ID Symbolsentexitexit FishTrackNoise Rejection Symbols with FishTrack depthsHyperScroll Overlay DataTo turn off displayed data Ping Speed & HyperScroll To change displayed data font sizeFrom the Sonar Page, press MENU↓ to Ping Speedent Reset Options Pop-up HelpSensitivity & Auto Sensitivity Reset Water DistanceScreen Contrast and Backlight Level Automatic Sensitivity Set Keel Offset Press MENUMENU↓ to SET Keel Offsetent Set LanguageSoftware Version Information Press MENUMENU↓ to Software Infoent Sonar Chart ModeSonar Page & Sonar Chart Display Options Split Zoom Sonar Chart Digital Data/Chart Stop Chart Sonar SimulatorSurface Clarity Units of Measure Press ↓ or ↑ to select clarity levelEXITEXITEXITZoom & Zoom Bar VolumeUpper and Lower Limits Zoom Pan Troubleshooting No fish arches when the Fish I.D. feature is off Noise Page Index Page Lowrance Electronics Full ONE-YEAR Warranty How to Obtain Service… Accessory Ordering Information for all countries Visit our web site