3. To return to the previous page, press EXITEXIT.
To change displayed data font size:
1.Press MENU↓ to OVERLAY DATAENT.
2.Press ↓ or ↑ to select Data Type, then press ENT. The DATA SIZE (displayed in the bottom of the Overlay Data Shown window) cycles through available sizes. Keep pressing ENT until it shows the desired
Data Size, then press EXIT.
The selected data type will be displayed in the new size. (To change the font size for another Data Type, press ENT and repeat these steps, beginning with step two above.)
3. To return to the previous page, press EXIT.
Tip:
If you wish, you can change the displayed data font size when you select a data type:
1.Press MENU↓ to OVERLAY DATAENT.
2.Press ↓ or ↑ to select Data Typepress ENT. repeatedly until the desired font size is shown.
The data will be shown in the new font size. To return to the previous page, press EXITEXIT.
Sonar chart with Overlay Data turned on. This example shows Depth, Water Temperature and the Water Speed of the boat.
Ping Speed & HyperScroll
Ping Speed controls the rate at which the transmitter and transducer broadcast sonar sound waves — pings — into the water. The unit has a default ping speed of 50 percent. At normal boating speeds, this automatically provides enough return echoes to refresh the screen and scroll the chart at maximum chart speed.
56