Graco 312497G important safety instructions MSP Series

Page 20

MSP Series

MSP Series

Technical Data

Material

Corrosion Protected Steel (optional: Type 316 Stainless

 

Steel)

Pressure (max)

 

Zero Leak Inlet

1500 psi (104 bar)

Shunt/Shutoff Inlet

3000 psi (207 bar)

Ambient Temperature (max)

140°F (60°C)

Lubricant

 

Zero Leak Inlet

Oil Only - up to 5000 SUS, requires 25 micron (min) filtra-

 

tion

Shunt/Shutoff Inlet

Oil and fluid grease - filter oil through 25 micron filter and

 

grease through 100 micron mesh strainer

New Weight (approx.)

 

3 section divider valve assembly

5.9 lbs (2.7 kg)

4 section divider valve assembly

7.3 lbs (3.3 kg)

5 section divider valve assembly

8.7 lbs (4.0 kg)

6 section divider valve assembly

10.2 lbs (4.6 kg)

7 section divider valve assembly

11.6 lbs (5.6 kg)

8 section divider valve assembly

13.0 lbs (5.9 kg)

Torque Ratings

 

Mounting Screw

8-9 ft. lbs

Enclosure Plugs

6-8 ft. lbs

Indicator Port Plug

5-7 ft. lbs

Bleed Screws

1-2 ft. lbs.

Tie Rod Nut

5-8 ft. lbs.

20

312497G

Image 20
Contents Maximum Pressure Lube Points Pressure kPSIDivider Type SectionsPressure Relief Procedure Setup Component IdentificationTypical Divider Valve Combinations Divider ValvesPrefilling Lubricant Distributor Lines Filling Secondary-to-Lube Point LinesFilling Master-to-Secondary Lube Lines Filling Master Divider Valve Repair Section Air purging afterTI11098 TI11113 Purging Air from Pump to Master Divider Valve Lines Lube Point Secondary Master Disconnect Hand Pump Bleed Hose Here Lube Point Secondary Master Performance Indicators Reset Indicator with MemoryRupture Indicator Automatic Relief Indicator4a. Master Divider Valve Equipped With Performance Indicator Torque Values *see , Assembly Torque ft-lbs MSP/MH MXP MGOContamination Blockage Separation BlockageTechnical Data DimensionsMD Series PartsMJ Series Lbs oz 1.55 kgParts MSP Series Crossport Plate Optional Parts MSP Series 312497G MHH Series Lube Outlet Inlet Typical Part No. Description MXP Series Ti11477 Parts MGO Series 54,%43 $#!4/2 0/243 Parts MX Series v /54,%4 Parts MX Series Accessories Rupture Indicator MH Divider Valves Only Rupture-to-Atmosphere Indicator Rupture-to-Atmosphere Indicator with Spud AssemblyCycle Indicators Rupture DiscsSingling and Crossporting Bar Assemblies 1175Part Numbers Cycle SwitchesCycle Counters Part No Proximity Cycle Switches Description Type Part Number Pins SealProximity Switch Connection Cables Connection Cables forGraco Standard Warranty Graco Information