Graco 312497G important safety instructions MGO Series, Technical Data

Page 30

MGO Series

MGO Series

Technical Data

Material

Zinc Plated Steel and Phosphate Coated Cast Iron

Pressure (max)

 

3-7 section divider valve assembly

6000 psi (414 bar)

8 section divider valve assembly

5500 psi (380 bar)

9 section divider valve assembly

5000 psi (345 bar)

10 section divider valve assembly

4500 psi (311 bar)

11 section divider valve assembly

4000 psi (276 bar)

Lubricant

Oil or grease

Maximum Operating Temperature

200°F (93°C)

Maximum Cycle Rate With Cycle Pin

60 CPM

Maximum Cycle Rate Without Cycle Pin or With Prox

200 CPM

Cycle Switch

 

Net Weight (approx.)

 

3 section divider valve assembly

45-lb. (20.41 kg)

4 section divider valve assembly

53 lbs. 5 oz (24.18 kg)

5 section divider valve assembly

61 lbs. 10 oz (27.95 kg)

6 section divider valve assembly

70 lbs. 15 oz (32.17 kg)

7 section divider valve assembly

80 lbs. 4 oz (36.40 kg)

8 section divider valve assembly

89 lbs. 9 oz (40.62 kg)

9 section divider valve assembly

98 lbs. 14 oz (44.84 kg)

10 section divider valve assembly

108 lbs. 3 oz (49.07 kg)

11 section divider valve assembly

117 lbs. 8 oz (53.40 kg)

Torque Ratings

 

Tie Rod Nut

12 ft. lbs

Enclosure Plug

15 ft. lbs

Outlet Port Plug

6-8 ft. lbs

Valve Section Mounting Screw

12-13 ft. lbs.

30

312497G

Image 30
Contents Divider Type Maximum Pressure Lube PointsPressure kPSI SectionsPressure Relief Procedure Typical Divider Valve Combinations SetupComponent Identification Divider ValvesPrefilling Lubricant Distributor Lines Filling Secondary-to-Lube Point LinesFilling Master-to-Secondary Lube Lines Filling Master Divider Valve Repair Section Air purging afterTI11098 TI11113 Purging Air from Pump to Master Divider Valve Lines Lube Point Secondary Master Disconnect Hand Pump Bleed Hose Here Lube Point Secondary Master Rupture Indicator Performance IndicatorsReset Indicator with Memory Automatic Relief Indicator4a. Master Divider Valve Equipped With Performance Indicator Torque Values *see , Assembly Torque ft-lbs MSP/MH MXP MGOContamination Blockage Separation BlockageMD Series Technical DataDimensions PartsMJ Series Lbs oz 1.55 kgParts MSP Series Crossport Plate Optional Parts MSP Series 312497G MHH Series Lube Outlet Inlet Typical Part No. Description MXP Series Ti11477 Parts MGO Series 54,%43 $#!4/2 0/243 Parts MX Series v /54,%4 Parts MX Series Accessories Rupture Indicator MH Divider Valves Only Rupture-to-Atmosphere Indicator Rupture-to-Atmosphere Indicator with Spud AssemblySingling and Crossporting Bar Assemblies Cycle IndicatorsRupture Discs 1175Cycle Switches Cycle Counters Part NoPart Numbers Proximity Cycle Switches Description Type Part Number Pins SealProximity Switch Connection Cables Connection Cables forGraco Standard Warranty Graco Information