Specifications | Panasonic KX-FLB751AL specs

Specifications

Technical data about this product!

Applicable lines:	Public Switched Telephone Network
Document size:	Max. 216 mm in width / Max. 600 mm in length
Effective scanning width:	208 mm
Effective printing width:	A4:	202 mm
	Letter/Legal:	208 mm
Transmission time*:	Approx. 4 s/page (ECM-MMR Memory transmission)**
Scanning density:	Horizontal: 11.8 pels/mm
	Vertical: 3.9 lines/mm – in standard resolution
	11.8 lines/mm – in fine/super fine/photo resolution
Halftone level:	64-level
Scanner type:	Contact Image Sensor (CIS)
Printer type:	Laser Beam Printer
Data compression system:	Modified Huffman (MH), Modified READ (MR),
	Modified Modified READ (MMR)
Modem speed:	33,600 / 31,200 / 28,800 / 26,400 / 24,000 / 21,600 / 19,200 / 16,800 /
	14,400 / 12,000 / 9,600 / 7,200 / 4,800 / 2,400 bps; Automatic Fallback
Operating environment:	10 °C – 32.5 °C, 20% – 80% RH (Relative Humidity)
Dimensions (H x W x D):	217 mm x 443 mm x 461 mm
Mass (Weight):	Approx. 9.2 kg
Power consumption:	Standby:	Approx. 7 W
	Transmission:	Approx. 17 W
	Reception:	Approx. 230 W
	Copy:	Approx. 230 W
	Maximum:	Approx. 560 W (When the fuser unit turns on)
Power supply:	220 – 240 V AC, 50/60 Hz
Memory capacity:	Approx. 150 pages of memory transmission/reception
	(Based on the ITU-T No. 1 Test Chart in standard resolution.)
Laser diode properties:	Laser output:	Max. 5 mW
	Wave length:	760 nm – 800 nm
	Emission duration: Continuous
Print speed:	Approx. 10 ppm (pages per minute)
Printing resolution:	600 x 600 dpi

** Transmission speed depends upon the contents of the pages,	ITU-T No. 1 Test Chart
resolution, telephone line conditions and capability of the other party’s

machine.
** Transmission speed is based upon the ITU-T No. 1 Test Chart and
original mode. If the capability of the other party’s machine is inferior
to your unit, the transmission time may be longer.

Note:

●Any details given in these instructions are subject to change without notice.

●The pictures and illustrations in these instructions may vary slightly from the actual product.

78

Image 78

Panasonic KX-FLB751AL operating instructions Specifications, Technical data about this product

Contents

Model No. KX-FLB751AL For your future reference TrademarksCopyright For Australian users Installation Service difficultiesImportant information for Australian users Safety instructions Important safety instructions Toner cartridge Laser radiationFuser unit Drum unit Accessory information AccessoriesIncluded accessories Model No Usage Specifications Table of Contents Programmable Features Help Button Help functionHelp SET Front view Finding the ControlsOverview Rear view Location Unlocking the shipping lock SetupConnecting the document cover Label for unlocking Toner cartridge and drum unit Green drumSurface Toner save feature Paper stacker and paper tray Paper stackerPaper tray Recording paper Adding paper Connections To use the fax machine with a computer on the same line Setting the date and time Date and time, your logo and fax numberMenu SET Setting your logo Handset MuteRecall SET To select characters using +or To select characters with the dial keypadDisplay order of characters Setting your facsimile telephone number To delete a numberMenu Recall SET Ringer volume VolumeAdjusting volume Handset receiver volume Automatic Dialling Storing names and telephone numbers into one-touch dialLower SET Stop Registered NAME= Storepress SET Editing a stored entry Erasing a stored entrySET Stop Using one-touch dial Using the directoryTo search for a name by initial Caller ID Caller ID service from your phone companyTo confirm caller information using the Caller ID list How Caller ID is displayed To display the caller’s telephone number Viewing and calling back using caller informationStop FAX Start Caller ID Display while viewing Erasing caller information Stop SET For navigator directory Press or Station keysLower SET Sending Faxes Using the auto document feederMonitor REDIAL/PAUSE Scan Resolution FAX Start Sending a fax manually To stop transmission Using the scanner glassScan Resolution Stop FAX Start Sending report for confirmation When the paper size is set to A4 When the paper size is set to LetterDocuments you can send Sending a fax using one-touch dial and navigator directory Lower Resolution Scan FAX Start Stop Manual Broad Broadcast transmissionProgramming entries into the broadcast memory Broadcast Manual Broad Menu Lower SET Adding a new entry into the broadcast memory Erasing a stored entry in the broadcast memory To cancel the broadcast setting Manual Broad Stop Scan Resolution FAX Start SETTo send the same document using the scanner glass Sending the same document to pre-programmed parties When receiving faxes Setting the unit to receive faxesWhen receiving calls When receiving phone Receiving Faxes When receiving calls Remote fax activation TEL mode Answering all calls manually Activating TEL modeReceiving a fax manually FAX only mode All calls are received as faxes Activating FAX only mode Using the unit with an answering machine Setting up the fax machine and an answering machine Receiving faxes How the fax machine and answering machine workReceiving phone calls Receiving a voice message and fax document in one call Using with the ring detection feature Receiving Faxes / Distinctive RingExtension telephone Copying Stop Copy Start ResolutionStop Resolution Copy Start Making a copy To enlarge a document Using the auto document feederUsing the scanner glass To reduce a document Setup PC Connecting to a computer Installing Multi-Function Station software To uninstall the software Viewer Scan p Remote Control pActivating Multi-Function Station software Readiris OCR p Printing PC Using the fax machine as a printerSetting the printer properties Printing from Windows applications Transparencies Labels Envelopes Using other applications Using the fax machine as a scannerUsing Multi-Function Viewer Scanning PC Remote Control PC Operating the fax machine from your computer Features Summary ProgrammingGeneral programming method Error Basic featuresHow to set the basic features Programming table OFF ToneParallel Advanced features How to set the advanced features Normal Australia Error Messages Reports Display message Cause & solution Display Error Messages General When a function does not work, check hereOperations Fax sending Receiving mode Fax receivingCopying Using an answering machine Multi-Function Station If a power failure occurs Even after clicking Cancel, scanning continuesMulti-Function Station does not work properly Replacement Replacing the toner cartridge and the drum unit Green drum surface Recording paper jam Replacement / JamsWhen the recording paper has jammed in the unit Waste disposal method When the recording paper is not fed into the unit properly Jams White plate and glasses Jams / CleaningDocument jams sending White plate and scanner glass Cleaning Lower glass Document feeder rollers Printed Reports Reference lists and reportsMenu SET Stop Specifications Technical data about this product Paper specifications Code/Feature name IndexProgram index Index Index Page PFQX1676ZA DM0102ST0