Sending Faxes
Sending a fax using one-touch dial and navigator directory!
Before using this feature, program the desired names and telephone numbers into
1 | Adjust the width of the document guides to | ||
the size of the document. |
| ||
2 | Insert the document (up to 15 pages) FACE | ||
DOWN into the feeder until the unit grasps | |||
| the document and a single beep is heard. | ||
| ● Confirm that there are no documents on | ||
| the scanner glass. |
| |
|
|
|
|
| Display: |
| STANDARD |
|
|
| |
|
|
|
|
| If necessary, press u |
3 repeatedly to select the desired setting | |
| (p. 32). |
4 | Enter the fax number. |
Using stations |
Press the desired station key.
Using stations
Press o, then press the desired station key.
Using navigator directory:
Press (or ), then press +or
●For further details about using the directory, see page 27.
5 Press i.
Document guides
Station keys
|
| E |
| N | |
| C |
|
| ||
A |
|
| W | ||
F |
|
| O |
| |
|
| D |
|
|
LOWER | RESOLUTION | |
SCAN FAX START | ||
| ||
| STOP |
Note:
●Do not open the document cover when sending a fax with the auto document feeder.
To send a fax using the scanner glass
●Confirm that there are no documents in the auto document feeder.
1.Open the document cover.
2.Place the document FACE DOWN, then close the document cover.
3.Enter the fax number (see step 4 above).
●To send a single page, skip to step 7.
●To send multiple pages, go to the next step.
4.Press •to scan the document into memory.
5.Place the next page.
6.Press •.
●To send more pages, repeat steps 5 and 6.
7.Press i.
Fax auto redial
If the line is busy or if there is no answer, the unit will automatically redial the number up to 2 times.
●This feature is also available for delayed transmission (feature #25 on page 60).
●During redial, the following will be displayed.
WAITING REDIAL
●To cancel redialling, press {.
If your unit does not send a fax
●Confirm the stored telephone number on the display and check that the number dialled is answered by the other party’s machine (p. 27).
●The connecting tone will be heard during dialling to tell you the status of the other party’s machine (feature #76 on page 62).
35