Graco 309909H important safety instructions Tube Connections, Low Pressure Pumps, Side

Page 44

Parts

Tube Connections, Low Pressure Pumps

Find the keys on the drawing to ensure proper connections.

		Ref.	Length,
Key	Description	No.	in. (mm)

A1	Dispense Valve A OFF	56	24 (610)

A2	Dispense Valve A ON	57	24 (610)
B1	Dispense Valve B OFF	59	24 (610)
B2	Dispense Valve B ON	58	24 (610)

C1	Air to Pneumatic Control (10)	60	8 (203)
D1	Air Filter (9) Drain Tube	70	24 (610)
D2	Air Filter (7) Drain Tube	70	18 (457)

G1	Gun Air Regulator (74) Input	60	31 (787)

		Ref.	Length,
Key	Description	No.	in. (mm)

G2	Gun Air Regulator (74) Output	60	30 (762)
L1	Fluid Line, Pump A to Dispense Valve A	78	18 (457)

L2	Fluid Line, Pump B to Dispense Valve B	78	18 (457)
M1	Air Filter (9) to Air Control (3)	24	18 (457)
P1	Pump A Input Air	60	17 (432)

P2	Pump B Input Air	60	21 (533)
S1	Pump A Solenoid Inputs (2 tubes)	70	2 (51)
S2	Pump B Solenoid Inputs (2 tubes)	70	2 (51)

							P2		P1
G2
							C1		G1
G1
M1
			D1
									M1
									D2
P2									P1
B Side									A Side
S2									S1
					C1
							D1		D2

	B2					A2
L2									L1

			B1		A1

	B1		A1
L2				L1
B2			A2

TI5278a

44

309909H

Image 44

Contents Repair Parts Important Safety InstructionsContents Manual ConventionsProMix Easy Models Series Description Psi MPa, bar ApprovalsRelated Manuals Component Manuals in English DescriptionFire and Explosion Hazard Equipment Misuse Hazard Pressure Relief Procedure Fluid Manifold to GunPump to Fluid Manifold Maintenance Problem SolutionTroubleshooting Problem Cause SolutionCircuit. See Electrical Schematic, Relieve pressure. Install larger tip. Follow Code Startup ErrorsOperating Errors Code Alarm Active Problem Cause Testing ErrorRepair Replacing Air Filter ElementSoftware Upgrades RemovalReplacing Main Circuit Board Replacing Display Circuit Board Pneumatic Control Alternator RepairReplacing Alternator Regulator Replacing AlarmReplacing Solenoids Dispense Valve/Mix Manifold Assembly Follow Pressure Relief Procedure,Schematic Main Control Board Schematic Pump Solenoid Expansion Board SchematicMain Control Board LEDs PinParts Part No Series A, Pump-based, Cart-mounted Air Spray UnitCable Connections 78 RefNo. Part No. Description Pump and Meter-based, Wall-mounted Air Spray Units Pump Solenoid Cable Connections See page 27 for model numbers and descriptions Description QtyPump-based, Wall-mounted Air Spray Units 494025 24 Ref See page 30 for model numbers and descriptions Meter-based, Wall-mounted High Pressure Units 65 Ref 4025 24 Ref See page 33 for model numbers and descriptions Pump-based, Wall-mounted High Pressure Units Muffler See page 36 for model numbers and descriptions Ft 5.2 ft Pump and Meter-based, Wall-mounted High Pressure Units TI4908a See page 40 for model numbers and descriptions MufflerCheck Valve Tube Connections, Low Pressure Pumps SideTube Connections, High Pressure Pumps P2P1Tube Connections, Meters C1G1 P2 M1Pneumatic Schematic Intrinsically Safe Pneumatic Control Part No. Description QtyAlternator Module 304 Detail Solenoid Module 306 DetailNon-intrinsically Safe Pneumatic Control 307 User Interface DisplayPump Air Control Meter Air Control No. Part No. Description QtyTechnical Data Technical Data Graco Standard Warranty Graco Information