Amplitude LFO Section

LFO Frequency: The Amplitude LFO Frequency value can be set between 0.1 and 10 Hz and controls the rate at which the Amplitude LFO oscillates.

Control Source: The Control Source selects between Internal LFO, Mod Wheel, Breath Control, or a combination of either Internal LFO and Mod Wheel or Internal LFO and Breath Control.

Invert: When enabled, this setting reverses the incoming MIDI controller data values.

Synch: This option provides a single, synchronized LFO across all regions. When Synch is enabled, the LFO will be constant no matter what note is played or when it is struck. When Synch is disabled, the LFO begins at the point in time when each individual note is struck and will have its own “out of synch” and independent cycle. When Synch is enabled, the LFO cycle will stay in synch for all the notes no matter when they are triggered.

Internal Depth: This parameter applies a fixed Amplitude LFO depth that is always present when “Internal” is selected as a Control source.

External Depth: An external MIDI continuous controller can also be used to control LFO Depth. This setting works the same way as the Internal depth settings but you won’t hear its effect until the assigned MIDI controller is engaged.

Note: The Amplitude LFO works completely independent of the Amplitude Envelope settings