Midi Control Section, KEY Response Section

MIDI CONTROL SECTION

Cutoff Controller: This parameter allows you to assign a MIDI controller to the Filter Cutoff Frequency for real-time continuous control. This assignment overrides the Cutoff Frequency value, which will be disabled once you assign a MIDI controller here.

Invert: When enabled, this setting reverses the incoming MIDI controller data values.

Resonance Controller: This parameter allows you to assign a MIDI controller to the Filter Resonance for real-time continuous control. This assignment overrides the Filter Resonance value, which will be disabled once you assign a MIDI controller here.

FILTER ENVELOPE MODULATION SECTION

Controller: The Filter Envelope Modulation controls allow external MIDI control of the Attack, Decay and Release of a regions Filter envelope. Use the Controller drop-down menu to choose the MIDI controller from the list of standard MIDI controllers.

Invert: When enabled, this setting reverses the incoming MIDI controller data values.

Attack, Decay, and Release depth: These sliders allow you to enable MIDI control of Filter Envelope parameters. Enabling these parameters allows the specified MIDI Modulation Controller to affect one, two, or all three parameters at once and with varying intensity for each.

KEY RESPONSE SECTION

Velocity (Vel) Curve: This parameter allows you to select how filter parameters respond to the incoming Note On velocity of each region. You can choose between Linear, Non-Linear and Special curves.

Velocity (Vel) Dynamic Range: With this setting, you can lower or raise the dynamic range of the response of the Filter Velocity Curve.

Note: Please see the Velocity Response Section for diagrams of each Velocity Curve type.

Key Tracking: Enabling Key Tracking scales the Filter Cutoff frequency based on key position relative to the assigned Breakpoint value. With this feature, you can have the filter go from dark to bright as you play from one end of the keyboard to the other.

Break Point: Adjust this value to set the breakpoint for the filter Keyboard Tracking. Range is from 0-127 with a default value of 60 (Middle C).