Tascam owner manual GVI Filter TAB, Filter Section

GVI FILTER TAB

FILTER SECTION

Filter Type: This drop-down menu allows you to enable/disable filtering and select which type of filter will be used from the following list:

None – The Filter mode is completely bypassed

Lowpass – This option filters out high frequencies above the Cutoff point

Highpass – This option filters out low frequencies below the Cutoff point

Bandpass – This option filters out frequencies above and below the Cutoff point

Bandreject – This option performs inverse filtering of mid frequencies

Turbo: Enabling the Turbo option adds additional poles of attenuation to the Lowpass filter algorithm. This creates a more intense analog filter effect. This option is only audible when the selected Filter type is set to “Lowpass”.

Note: When used with certain resonance settings, Turbo LPF can generate high amplitude resonant frequency oscillations. Proceed with caution when editing at loud volumes. This could be damaging to your ears or speakers.

Cutoff: This parameter behaves differently for each Filter type. For Lowpass, Cutoff sets the maximum filter cutoff frequency. For Highpass, Cutoff sets the minimum filter cutoff frequency. For Bandpass and Bandreject, Cutoff sets the Filter’s center frequency.

16