Displays & Controls
Display
All the display information is explained and/or referenced here.
1 |
| 2 3 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 |
| 12 | 13 | ||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| SIGNAL ATT |
|
|
|
|
|
|
|
|
| DSP |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||||||||
|
|
|
| LOUDNESS |
| MIDNIGHT |
|
| STEREO |
|
|
|
|
|
|
|
|
| VOLUME |
|
|
| ||||||||||||
|
|
|
|
|
| PRO LOGIC |
|
|
|
|
| |||||||||||||||||||||||
|
| SELECT OVER |
| H.P |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ANALOG SP | AB | DIGITAL | ||
DIGITAL | MONO STEREO | dB | ||
AUTO | TUNED AMFM | TAPE 2 | ||
|
| |||
L | C | R | LFE |
|
LS | S | RS |
|
|
PREPARATION
15
1SIGNAL SELECT indicators
Light to indicate the input signal you selected.
ANALOG : Lights when analog signals are assigned.
DIGITAL: Lights when digital audio signals are selected.
AUTO: Lights when the receiver is set to select the input signal automatically.
2 Program Format indicators
DTS: Lights when a source with DTS audio signals is played.
For Dolby Digital or DTS sources: These indicators change according to which channels are active in the source.
L – Left front channel. C – Center channel.
R – Right front channel.
LS – Left surround channel. S – Surround channel (mono). RS – Right surround channel.
LFE – Low Frequency Effects channel.
3 Analog level indicators
OVER – When the source signal is analog, this lights if the signal is in danger of distorting. Press INPUT ATT on the remote control to lower the signal level.
ATT – Lights when INPUT ATT is used to reduce the level of the analog source signal.
14
7MIDNIGHT indicator (See p.49)
Lights when the MIDNIGHT LISTENING mode is on.
8DSP indicator (See
Light when a DSP or Advanced Theater mode is selected.
9STEREO indicator
Lights when a STEREO mode is selected.
10Radio Frequency/Function indicator
Displays the function or the frequency of the current radio station.
112/dts mode indicators
2DIGITAL : When the 2/dts mode on the
receiver is on, this indicator lights to indicate playback of a Dolby Digital signal. However, 2 PRO LOGIC lights during 2 channel playback of Dolby Digital.
2PRO LOGIC: When the 2/dts mode on the receiver is on, this indicator lights during 2 channel playback.
DTS : When the 2/dts mode on the receiver is on, this indicator lights to indicate playback of a DTS signal.
12 MASTER VOLUME indication
Displays current volume level.
13 TAPE 2 indicator
Lights when the TAPE 2 monitor is on.
4Speaker indicators
Light to indicate the current speaker system, A and/or B.
5LOUDNESS indicator (See p.49)
Lights when the LOUDNESS mode is on.
6H.P (headphones)
Lights when headphones are connected to the PHONES jack (speakers systems A and B both turn off automatically).
14 Character display
Shows current mode, status, etc.
15 Tuner indicators
MONO: Lights when the tuner is set to receive FM broadcasts and when selected MPX mode. STEREO: Lights when a FM stereo broadcast is received in the auto stereo mode.
TUNED: Lights when a broadcast is received.
AM/FM: Light to indicate the current band (FM or AM).
25