Section
02 Before You Start
When you are watching a DVD and attempt to perform an operation, it may not be performed because of the programming on the disc.
When this happens, the icon appears on the screen.
!The icon may not appear with certain discs.
The front panel can be detached to deter theft.
!If the front panel is not detached from the head unit within five seconds of turning off the ignition, a warning tone will sound.
!You can turn off the warning tone. See Switching the warning tone on page 39.
Important
!Handle gently when removing or attaching the front panel.
!Avoid subjecting the front panel to excessive shocks.
!Keep the front panel out of direct sunlight and high temperatures.
!If removed, replace the front panel on the unit before starting up your vehicle.
Release button
%Replace the front panel by holding it
upright to the unit and clipping it securely into the mounting hook.
Pressing RESET lets you reset the micropro- cessor to its initial settings.
The microprocessor must be reset under the following conditions:
!Prior to using this unit for the first time after installation
!If the unit fails to operate properly
!When strange or incorrect messages ap- pear on the display
1Turn the ignition switch OFF.
2Press RESET with a pen tip or other pointed instrument.
% Push the release button downward and release the front panel.
Take care not to grip it too tightly or to drop the front panel and protect it from contact with water or other fluids to prevent perma-
nent damage. | RESET button |
|
10 En