Pioneer AVH-P4900D Selecting the SIRIUS channel select mode, Selecting a SIRIUS channel directly

Section

04 Available accessories

Storing and recalling broadcast stations

You can easily store up to six broadcast sta- tions for later recall.

!Up to 18 stations, six for each of three SIR- IUS bands can be stored in memory.

%When you find a station that you want to store in memory keep touching a preset tuning key P1 to P6 until PCH SET is dis- played.

The selected station has been stored in mem- ory.

The next time you touch the same preset tun- ing key P1 to P6 the station is recalled from memory.

# When the touch panel keys are not displayed, you can display them by touching the screen.

# When P1 to P6 are not displayed, you can dis- play them by touching LIST.

Selecting the SIRIUS channel select mode

You have two methods for selecting a channel: by number and by category. When selecting by number, channels in any category can be selected. Select by category to narrow your search down to only channels in a particular category.

%Touch MODE to select the desired chan- nel select mode.

Touch MODE repeatedly to switch between the following channel select modes: CH-Number (channel number select setting)

—Category (channel category select setting)

Selecting a channel in the channel category

Channels are organized into various program categories, e.g. Rock, Classic, Jazz. You can specify channels by selecting the desired category.

1Touch MODE to select the channel cate- gory select mode.

Touch MODE repeatedly to switch between the following channel select modes: CH-Number (channel number select setting)

—Category (channel category select setting)

2Touch aor bto select the desired chan- nel category.

3Touch cor dto select the desired chan- nel in the selected channel category.

Selecting a SIRIUS channel directly

You can select a SIRIUS channel directly by entering the desired channel number.

1 Touch DIRECT.

CHANNEL INPUT appears in the display.

2Touch 0 to 9 to input the desired chan- nel number.

# To cancel the input numbers, touch C.

3While the input number is displayed, touch ENTER.

The SIRIUS channel of entered number is selected.

Displaying the Radio ID

If you select CH:000, the ID code is displayed.

%Touch cor dto select CH : 000.

#To select CH:000, set the channel select set- ting to CH-Number. About the channel select set-

ting, refer to Selecting the SIRIUS channel select mode on this page

48 En