Other Functions
1
1Setup menu display
Shows the setup function names.
%Press A.MENU button and touch SETUP to display the setup function names.
The setup function names are displayed and operable ones are highlighted.
# To return to the previous display, touch BACK.
# To return to the display of each source, touch ESC.
Note
If you do not operate the setup function within about 30 seconds, the display is automatically re- turned to the source display.
You can switch the setting according to the connected component.
!Select VIDEO to watch video of a con- nected component as AV source.
!Select
!Select
%Touch AV IN on the setup menu to se- lect the AV input setting.
Touch AV IN until the desired setting is se- lected.
Section
03
! OFF – No video component is connected |
| |
! VIDEO – External video component (such |
| |
as portable video player) | Operating | |
! | ||
| ||
RCA cable |
| |
! |
| |
Pioneer products available in the future) |
| |
# When a | this | |
an | ||
| ||
no picture will be displayed even if you select | unit | |
|
CAUTION
Pioneer recommends the use of a camera which outputs mirror reversed images, other- wise screen image may appear reversed.
This unit features a function that automatically switches to the rear view camera video (REAR VIEW CAMERA IN jack) when a rear view camera is installed on your vehicle. When the gear shift is in REVERSE (R) position, the video automatically switches to a rear view camera video. (For more details, consult your dealer.)
!After you set up the rear view camera set- ting, move the gear shift in REVERSE (R) and confirm if a rear view camera video can be shown on the display.
!If the display should be switched to a rear view camera video by error while you are driving forward, change the rear view cam- era setting.
!To end watching a rear view camera video and return to the source display, press V.ADJ.
1 Touch
En 41