Available accessories
!AUX (auxiliary input) and AV (AV input) are set to the same source level adjustment volume automatically.
The dynamic range refers to the difference be- tween the largest and softest sounds. The dy- namic range control compresses this difference so that you can clearly hear sounds even at low volume levels.
!The dynamic range control is effective only on Dolby Digital sounds.
!When playing other than the DVD disc, you cannot switch to D.R.C.
1Touch D.R.C on the DSP function menu.
# When playing other than the DVD disc, you cannot switch this mode.
2Touch ato turn the dynamic range con- trol on.
# To turn dynamic range control off, touch b.
The
1Touch DOWN MIX on the DSP function menu.
2Touch cor dto select the desired level. Touch cto select Lo/Ro. Touch dto select Lt/Rt.
!Lo/Ro – Stereo mix the original audio that do not contain channel modes such as sur- round components.
!Lt/Rt – Down mix so that the surround components can be restored (decoded).
Section
04
You can override audio settings to check for ef- |
| |
fectiveness of your audio settings. |
| |
! All audio functions are locked out when the |
| |
direct control is on except VOLUME. | Available | |
1 Touch DIGITL DIRECT on the DSP func- | ||
| ||
tion menu. | accessories | |
2 Touch ato turn the direct control on. | ||
| ||
# To turn direct control off, touch b. |
| |
Using the Dolby Pro Logic II |
|
Dolby Pro Logic II creates five
!Dolby Pro Logic II supports up to 48kHz sampling rate stereo source and has no ef- fect on other types of source.
1Touch NEXT on the DSP function menu.
2Touch DOLBY PL II.
3Touch any of the following touch panel keys to select the desired mode.
!MOVIE – The Movie mode suitable for movie playback
!MUSIC – The Music mode suitable for music playback
!MATRIX – The Matrix mode for when FM radio reception is weak
!OFF – Turn Dolby Pro Logic II off
!ADJUST – Adjust the Music mode
#You can operate ADJUST only when MUSIC has been selected.
You can adjust the Music mode with the fol- lowing three controls.
En 61