Section
03 Operating this unit
1Touch SETUP and VISUAL and then touch PARENTAL.
2Touch 0 to 9 to input the registered code number.
3Touch ENTER.
This enters the code number, and you can now change the level.
#If you input an incorrect code number, the
icon is displayed. Touch C and input the cor- rect code number.
#If you forget your code number, refer to If you forget your code number on this page.
4Touch any of 1 to 8 to select the desired level.
The new parental lock level is set.
Refer to Changing the level on the previous page, and touch C 10 times. The registered code number is canceled, letting you register a new one.
Using the initial settings, you can customize various system settings to achieve optimal per- formance from this unit.
1
1Function display
Shows the function names.
1Touch the source icon and then touch OFF to turn this unit off.
# When the source icon is not displayed, you can display it by touching the screen.
2Press A.MENU button and touch INIT to display the initial function names.
The function names are displayed and oper- able ones are highlighted.
# To go to the next group of function names, touch NEXT.
# To return to the previous group of function names, touch PREV.
# When the
# To return to the previous display, touch BACK.
# To return to the display of each source, touch ESC.
38 En