Section
Tuner
76 5
1Source icon
2Band indicator
3Preset number indicator
4Frequency indicator
5Preset list display
6LOCAL indicator
Shows when local seek tuning is on.
7STEREO indicator
Shows when the selected frequency is being broadcast in stereo.
1Touch the source icon and then touch TUNER to select the tuner.
2Touch the screen to display the touch panel keys.
3Touch BAND to select a band.
Touch BAND until the desired band (FM1, FM2, FM3 for FM or AM) is displayed.
4To select a preset channel, touch a pre- set channel on the list.
The preset channel you selected is tuned in.
# When the list of channels is not displayed, touch LIST.
5To perform manual tuning, briefly touch cor d.
The frequencies move up or down step by step.
# You can also perform manual tuning by press- ing cor dbutton.
6To perform seek tuning, keep touching cor dfor about one second and release. The tuner will scan the frequencies until a broadcast strong enough for good reception is found.
# You can cancel seek tuning by briefly touching either cor d.
# If you keep touching cor dyou can skip sta- tions. Seek tuning starts as soon as you release the key.
# You can also perform seek tuning by pressing and holding cor dbutton.
Note
If you do not use the touch panel keys within 30 seconds, they will be hidden automatically.
You can easily store up to six broadcast fre- quencies for later recall.
!Up to 18 FM stations, six for each of the three FM bands, and six AM stations can be stored in memory.
%When you find a frequency that you want to store in memory keep touching one of preset tuning keys P1 to P6 until the preset number stops flashing.
The number you have touched will flash in the preset number indicator and then remain lit. The selected radio station frequency has been stored in memory.
18 En