Pioneer VSX-917V-S/-K manual Connecting other video components

Connecting up 03

However, the connected DVD player, set-top box, etc. must be able to output WMA9 Pro format audio signals through a coaxial or optical digital output.

Windows Media®, and the Windows logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and/or other countries.

Connecting other video components

This receiver has audio/video inputs and outputs suitable for connecting analog or digital video recorders, including VCRs, DVD- recorders and HDD recorders.

1Connect a set of audio/video outputs on the recorder to the DVR/VCR AUDIO and VIDEO inputs on this receiver.

Use a stereo RCA phono cable for the audio connection and a standard RCA video cable for the video connection.1

2Connect a set of audio/video inputs on the recorder to the DVR/VCR AUDIO and VIDEO outputs on this receiver.

Use a stereo RCA phono cable for the audio connection and a standard RCA video cable for the video connection.2

3Connect a coaxial digital audio output on your video component to the DIGITAL COAX 2 (DVR/VCR) input on this receiver.

Use a coaxial digital audio cable for the connection.3

4If your video component has a digital input, connect it to the digital output on the receiver as shown.

Use an optical cable to make this connection.

This receiver
	DIGITAL OUT	IN
	OPT				FM UNBAL
					75 Ω
		IN					MONITOR OUT
	OPT					OUT
	2
	(TV/ SAT)	IN		DVR /		CONTROL
	OPT			VCR
	1					IN			OUT
	(CD)	OUT
	ASSIGNABLE								DVR /
	DIGITAL IN			TV /	IN	OUT			VCR
		IN							IN
				SAT
									TV /
				DVD	IN	MONITOR			SAT
									IN
	ASSIGNABLE			/LD		OUT
		IN		FRONT
	DIGITALIN				D V D
	COAX				5.1CH	SUB			DVD
	2			PLAY	INPUT
					IN	WOOFER			/LD
	(DVR/VCR)			CD-R		PREOUT			IN
		IN
	COAX			/ TAPE			S-VIDEO
				/ MD
	1
	(DVD/LD)	OUT		REC
		R	AUDIO	L
3		1				2
OPTICAL	COAXIAL	R	IN	L		R	OUT	L
			REC				PLAY
DIGITAL OUT			AUDIO IN		VIDEO IN	AUDIO OUT			VIDEO OUT

4VCR, DVR, LD player, etc.

OPTICAL

DIGITAL IN

English Deutsch Français Italiano Nederlands Español

Note

1For better quality, you can also connect with S-video using the S-VIDEO DVR/VCR IN jack. If your video component also has a component video output, you can connect this too. See Using the component video jacks on page 18 for more on this.

2For better quality, you can also connect with S-video using the S-VIDEO DVR/VCR OUT jack.

3If your video component only has an optical digital output, you can connect it to the optical input on this receiver using an optical cable. When you set up the receiver you’ll need to tell the receiver which input you connected the player to (see The Input Assign menu on page 62).

17

En