10Controlling the rest of your system
Direct function
• Default setting: ON
You can use the direct function feature to control one component using the remote control while at the same time, using your receiver to playback a different component.
This could let you, for example, use the remote control to set up and listen to a CD on the receiver and then use the remote control to rewind a tape in your VCR while you continue to listen to your CD player.
When direct function is on, any component you select (using the MULTI CONTROL buttons) will be selected by both the receiver and the remote control. When you turn direct function off, you can operate the remote
control without affecting the receiver.1
1While pressing the RECEIVER button, press and hold the SETUP button.
The remote LCD display shows SETUP.
2 Use | to select DIRECT F then press |
ENTER. |
|
3Press the MULTI CONTROL button for the component you want to control then press
ENTER.
The LCD on the remote displays the component you want to control.
4 Use to switch direct function ON or OFF then press ENTER.
The LCD shows OK to confirm the setting.
Confirming preset codes
Use this feature to check which preset code is assigned to a MULTI CONTROL button.
1While pressing the RECEIVER button, press and hold the SETUP button.
The remote LCD display shows SETUP.
2 Use | to select READ ID then press |
ENTER. |
|
3Press the MULTI CONTROL button of the component for which you want to check the preset code.
The brand name and preset code appears in the display for three seconds.
Note
1 You can’t use direct function with the TV CTRL function.
52
En