Blaupunkt RTM 127 KeyCard LED, Angle, Ignition timer, Keytones, Vario Colour, Brightness, Reset

Models: RTM 127

1 68
Download 68 pages 23.43 Kb
Page 27
Image 27

Programming with DSC – Setup

KeyCard LED

You can choose between LED ON or LED OFF. If you select LED ON, the KeyCard tongue will flash as an additional anti-theft device when the unit has been switched off and the KeyCard removed.

Angle

Adjusts the angle of the display to your per- sonal preference.

Ignition timer

You can choose between the following user modes:

Standard Radio only

Any changes made will not take effect until you have quit the menu.

DEUTSCH

BEEP

Confirmation beep following functions which require you to press the button for longer than 1 second.

Set volume from 0 to 9 (0 = off).

Keytones

After a key is pressed, a short beep is emit- ted as confirmation.

Set volume from 0 to 9 (0 = off).

Vario Colour

Adjusts the colour of the display illumina- tion to the dashboard illumination.

green

....................................................''

red

Brightness

Adjusts the brightness of the display illumi- nation, available separately for day (D) and night (N).

Use this setting to allow the car radio to play

Reset

for a maximum of 90 minutes after the igni-

tion has been switched off.

If you select this menu item, you will be re-

0 = ignition timer switched off.

quired to enter the access code after you

 

Change code

press OK. Enter the access code and press

OK. Press CL to cancel the process, or con-

 

The access to important DSC menu items

firm by pressing OK.

(for telephone operation as well) is protect-

Three selections will appear in the display:

ed with a security code.

Radio

At the factory, this code is set to ”0000”.

Phone

If you would like to alter it be sure to make

SIM card.

a note of the new code!

If you select “Radio” or “Phone”, all of the

Enter the original code (in this case ”0000”)

settings altered in the DSC menu including

and press OK.

the telephone menu will be reset to the fac-

Enter the new code, press OK. Enter the

tory default settings.

new code once again, press OK.

All of the trained KeyCards and SIM cards

 

will also be deleted, with the exception of

User mode

the KeyCard currently in the unit.

If you select this menu item, you will be re-

If you select “SIM card”, all of the data stored

on the SIM card will be deleted.

quired to enter the access code after you

 

press OK. Enter the access code and press

 

OK.

 

Radio

ENGLSHTelefon

TelephoneRadio

93

Page 27
Image 27
Blaupunkt RTM 127 KeyCard LED, Angle, Ignition timer, Keytones, Vario Colour, Brightness, Reset, Change code, User mode